Jet-Lube Kopr-Kote - Copper Based | High Temperature | EP Lubricant | Anti-Seize | Military Grade | Low Friction - | 1 Lb

Kopr-Kote Industrial is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. It provides a shield against metal-to-metal contact, preventing seizure and corrosion. It fills irregularities and imperfections and resists welding, hardening, or setting. Kopr-Kote Industrial provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up, or wash off. Has controlled frictional characteristics so that the surfaces of the nut and bolt are torque to the designed K-factor. Assures full hydraulic efficiency by allowing the metal surfaces to slide over each other without metal-to-metal contact. Designed for specially formulated to prevent excessive over torque issues and has a very high static friction factor of 0.17, the unique blend of complex thickeners to help evenly distribute the copper flake onto the metal surfaces to eliminate metal to threaded metal contact. Recommended lubrication: stud threads shall be thoroughly lubricated on both ends, fill the threaded area "Root-to-Crest" on the stud/bolt. The nut will push the anti-seize down the threads as it travels. Bearing surfaces between nut and hardened waher or nut and flange should be lubricated with anti-seize in the area where the nut will rest against the flange or washer. Anti-seize on the assembly should be easily visible. Not recommended for: Oxygen services or on zinc coated parts or fasteners. Wear gloves and protective overalls. Do not allow it to enter drains. Spillage: scrape up bulk, then wipe up remainder with cloth. To prevent walking hazard, pick up remaining residue with diatomaceous earth. Service rating: -65 degree F to 1800 degree F. K-Factor: 0.15. Eco-certified. Size: 1 lbs brush top can. High Temperature Anti-Seize Lubricant: 1 lb Can -65 to 1,800 ° F, Copper & Bronze, Water-Resistant, Type: High Temperature, Lubricant Type: High Temperature, Food Grade: Yes, Container Size Range: 16 to 31.9 oz, Color: Copper, Bronze, Voc Content: 0.0g/L, Water Resistant: Yes, Container Type: Can, Container Size: 1 lb, Flammable: No, Odorless: Yes, Voc Compliant: Yes, Flash Point (C): 232.00, Composition: Copper, Graphite, Nuclear Grade: No, Minimum Temperature (Deg F - 3 Decimals): -65.00, Minimum Temperature (C - 2 Decimals): -53.89, Maximum Temperature (F) ( - 0 Decimals): 1800.00, Maximum Temperature (C): 982.22, Standards: Conforms to MIL-PRF-907F; Conforms to RAYTHEON spec M8656839 Type II; NSF Registered H2 (No. 120923); Not Classified as a Marine Pollutant - DOT Approval CA2004080025, Certification: NSF H2, Trade Name/Number: Kopr-Kote.

• Whitstands high temperatures
• Environmentally safe and no classified as marine pollutant
• Military Grade
• Copper Based Lubricant
• HDD Application