HARKEN Premium Sailing Micro Cam-Matic Ball Bearing Cam Cleats Micro Carbo-Cam

Micro Carbo-Cam Cleat. Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams for racing where weight is critical, or where adjustments are less frequent. Downward flick snaps the sheet into the cam and stays exactly where you put it. Cam cleats activate with the snap of the wrist. Delrin ball bearings allow pawls to open and close effortlessly under both high and low loads. Legendary for smooth, positive operation when holding and releasing control lines. Harken Ball-Bearing Cam Cleats engage and release easily, and work with a wide range of line types and sizes. Specifications: Height: 22mm / 7/8in. Length: 48mm / 1-7/8in. Width: 24mm / 15/16in. Weight: 19g / .67oz Minimum line: 3mm / 1/8in Maximum line: 6mm / 1/4in. Fastener spacing: 27mm / 1-1/16in. Fasteners: 4 RH mm / #8 RH in. Maximum working load: 68kg/ 150lb Breaking load: 136kg / 300lb Pawls: Plastic carbon-matrix.

• Harken Ball-Bearing Cam Cleats engage and release easily, and work with a wide range of line types and sizes
• Downward flick snaps the sheet into the cam and stays exactly where you put it
• Cam cleats activate with the snap of the wrist
• Delrin ball bearings allow pawls to open and close effortlessly under both high and low loads
• Legendary for smooth, positive operation when holding and releasing control lines