Garmin MSC 10 Marine Satellite Compass, Easy-to-Install, Multi-Band GNSS and Multi-Constellation Receiver, (010-02407-00)

MSC 10 Marine Satellite Compass KNOW EXACTLY WHERE YOU'RE HEADED Get reliable, accurate heading information with the easy-to-install GPS-based MSC 10 marine satellite compass. Features: Accuracy comes easy when you’ve got a multi-band GNSS receiver on board. Faster updates. More detailed tracking. Rough waters got you worried? MSC 10 delivers pitch, roll, and heave info, too. If other onboard systems need a heading sensor, we’ve got you covered. MULTI-BAND GNSS AND MULTI-CONSTELLATION The multi-band GNSS (L1 and L5 GPS) and multi-constellation (GPS, Galileo 1 , GLONASS, and BeiDou1) receiver deliver precise positioning 2 . BOAT HEAVE AND MORE Get reliable, accurate boat heave, pitch, and roll information — even in rough waters. BUILT-IN ATTITUDE HEADING REFERENCE SYSTEM (AHRS) With a fully integrated attitude and heading reference system for better GPS heading at all speeds, including pitching in rough seas, taking sharp turns, or standing still. ACCURATE HEADING DATA Multiple receivers deliver heading accuracy within 2 degrees. Because it uses satellite signals, you don’t have to worry about magnetic interference. PRIMARY SENSOR ACROSS MULTIPLE SYSTEMS You can use MSC 10 as the primary sensor for autopilots and other onboard systems that need accurate heading information. NMEA 2000 NETWORK COMPATIBLE Get heading, pitch, roll, and heave information delivered straight to your compatible Garmin chartplotter via the NMEA 2000 network. EASY TO INSTALL This compact device is simple to install and easily integrates into your Garmin marine ecosystem. 10 HZ UPDATE RATE Get better, more detailed tracking information, thanks to the 10 Hz position update rate. BACKUP HEADING SENSOR In the extremely rare case that you lose a satellite signal, MSC 10 will seamlessly transition from GPS-based to magnetometer-based heading 3 . What's In The Box? MSC-10 Marine Satellite Compass Pole mount Mounting hardware NMEA 2000 backbone/drop cable (6 meters) NMEA 2000 T-connector Documentation 1 Supported when available 2 3 Magnetometer calibration required for backup magnetic heading support

• 10 Hz position update rates for high-sensitivity tracking
• Easily integrates into your Garmin marine ecosystem
• Compact device is simple to install with no calibration required, unless using magnetometer-based heading
• Works with multiple satellite constellations for faster, more reliable positioning
• Use as the primary sensor for autopilots and other onboard systems
• Multi-band GNSS (L1 and L5 GPS) receiver delivers accurate positioning within 1 meter; heading accuracy of 2-degree RMS in dynamic situations
• Get accurate heave information right on your chartplotter through the NMEA 2000 network
• Seamlessly transition from GPS-based to magnetometer-based heading if you lose satellite signal (magnetometer calibration required for backup magnetic heading support)
• Built-in attitude and heading reference system to filter and smooth GPS-derived heading