Marine/RV Gelcoat and Paint Cutting Compound - Fine Grain Boat Polishing Compound - 32oz

Polishing Compound - Fine Cut - 32oz This advanced fine cut, anti-hologram polish removes polishing haze and swirl marks for a 100% hologram-free finish. Featuring next-gen, self-grinding alumina abrasives, it's safe for all paint types - fresh, cured, and scratch-resistant. Water-based, silicone- and solvent-free. Features: Effectively removes holograms Free of solvents and silicone Appearance: Cream/Paste Solubility: N/A pH: 8 Use & Application: For the DiTEC Fine Cut Compound, we recommend using the DiTEC Red Trapez foam polishing pad. Application: Apply a sufficient amount of the polishing compound to the polishing pad or to the painted surface. Spread the compound at a low speed (about 1000 rpm) on the defect and at about 1600 rpm using moderate pressure., Type: Restoration & Compounds DiTEC's Polishing Compound (fine cut) easily removes scratches and holograms to leave a deep-gloss finish to your boat’s painted and gelcoat surfaces. Its intelligent, self-grinding alumina abrasive grains guarantee 100% hologram-free paint surface. It is water-based and can be used on all (including scratch-resistant) fresh and cured paints of your boat or car.

• FINE CUT: Fine grain for polishing painted and gelcoat surfaces
• SAFE FORMULA: Free of solvents and silicone – purely water-based. Can be used on ALL (including scratch-resistant) fresh and cured paints
• EASY TO USE: Can be used by any boater
• HOLOGRAM FREE GUARANTEE: Specially designed to effectively remove holograms on your boat's painted or gelcoated surfaces