Marine/RV Gelcoat and Paint Cutting Compound - Medium Grain Boat Polishing Compound for Removing Scratches on Glossy Surfaces

DiTEC's Medium Cut Polishing Compound is a one-step sanding and high-gloss polish designed to remove P3000 grit marks and fine scratches in a single pass. Its unique abrasive grain continuously refines for a flawless, hologram-free finish. Safe for all paint systems including scratch-resistant paints, and formulated silicone and solvent-free. Recommended use: for best results use with the DiTEC Orange Trapez foam polishing pad. Application: apply a sufficient amount to the pad or painted surface; spread at low speed (about 1000 rpm) on the defect and finish at about 1600 rpm using moderate pressure. Suitable for boat gelcoat and painted surfaces; works with rotating and dual-action polishers.

• MEDIUM CUT: Medium grain for polishing painted and gelcoat surfaces
• EASY TO USE: Can be used by any boater
• SAFE FORMULA: Fully suitable for all commercially-available paint systems, including scratch-resistant paints.
• HIGH PERFORMANCE: The unique abrasive grain contained in the fine abrasive paste grinds continuously while finely polishing to achieve a glossy look on your boat's painted or gelcoated surfaces